He FastICA algorithm to implement the above numerical processes, and we utilised an open R package52 with some modifications to perform the calculation. We used the contents of SiO2, TiO2, Al2O3, Fe2O3, MnO, MgO, CaO, K2O, P2O5, REY, and Ce as variables in the observed data matrix X. The values of major element contents are expressed in weight percent; those of REY and Ce are in parts per million. The difference in units does not affect the result of the ICA because the data are whitened to have unit variances for each variable. The number of ICs to be extracted is one of the important parameters for ICA11,12. Considering the balance of dimension reduction to exclude noise and retention of original information, we regarded the components that account for less than 1 of the total sample variance as unimportant signals, including noise. Although the statistical detection limit is often set at a somewhat higher level in common PCA or FA (e.g. 2 of the variance8), we selected 1 because ICA is expected to extract a signal of even small power when it contains clear non-Gaussianity. On the basis of this criterion, we extracted seven ICs in this study based on the eigenvalues obtained by PCA (Supplementary Table S3). To evaluate the variability of the ICA results owing to random initial values given in the FastICA algorithm9 to estimate the matrix W, we performed 100 computational runs of ICA on the fixed data matrix X PD173074 web repeatedly (Supplementary Fig. S7). Moreover, to evaluate the robustness of the ICA results to data uncertainties such as analytical error11,14, we performed an additional 100 computational runs repeatedly by using synthetic perturbed datasets created by normal random variables for each run, assuming that 5 relative per cent of the mean value of each elemental content corresponds to conceivable analytical error (Supplementary Fig. S7).Rare-earth elements and yttrium flux estimation. Considering that seawater is the ultimate origin ofREY in REY-rich mud, the formation of REY-rich mud should be controlled by the flux of REY from seawater to the sediment surface. Following a simple method22, we estimated the required REY flux for generating REY-rich mud on the basis of the results of the present study, and we compared the value with the REY-precipitation flux provided by the overlying water column. We used Nd as a representative of REY because this element has long been studied as a tracer of ocean EPZ004777 manufacturer circulation, and its residence time in the ocean appears to be the most reliable53,54. The mass of Nd contained in one unit volume of sediment can be written asmNd = sedC Nd, (6)Scientific RepoRts | 6:29603 | DOI: 10.1038/srepwww.nature.com/scientificreports/where sed is the dry bulk density of the sediment and CNd is the bulk content of Nd in the sediment. The regression line between the bulk Nd and total REY content CREY in our data isC Nd = 0.177C REY – 0.346.(7)CNd and CREY showed very good linearity, with R = 0.981 (n = 3,968). Substituting equation (7) for equation (6), the required flux F of Nd to explain the mass of Nd contained in one unit volume of sediment is described asF = R sed (0.177C REY – 0.346), (8)where R is the sedimentation rate. Conversely, the mass of Nd contained in the water column from the sea surface to the seafloor ismNd , SW = D SW C Nd , SW , (9)where D is the water depth, SW is the density of the seawater, and CNd,SW is the concentration of Nd in the seawater. Assuming that all of the Nd contained in the.He FastICA algorithm to implement the above numerical processes, and we utilised an open R package52 with some modifications to perform the calculation. We used the contents of SiO2, TiO2, Al2O3, Fe2O3, MnO, MgO, CaO, K2O, P2O5, REY, and Ce as variables in the observed data matrix X. The values of major element contents are expressed in weight percent; those of REY and Ce are in parts per million. The difference in units does not affect the result of the ICA because the data are whitened to have unit variances for each variable. The number of ICs to be extracted is one of the important parameters for ICA11,12. Considering the balance of dimension reduction to exclude noise and retention of original information, we regarded the components that account for less than 1 of the total sample variance as unimportant signals, including noise. Although the statistical detection limit is often set at a somewhat higher level in common PCA or FA (e.g. 2 of the variance8), we selected 1 because ICA is expected to extract a signal of even small power when it contains clear non-Gaussianity. On the basis of this criterion, we extracted seven ICs in this study based on the eigenvalues obtained by PCA (Supplementary Table S3). To evaluate the variability of the ICA results owing to random initial values given in the FastICA algorithm9 to estimate the matrix W, we performed 100 computational runs of ICA on the fixed data matrix X repeatedly (Supplementary Fig. S7). Moreover, to evaluate the robustness of the ICA results to data uncertainties such as analytical error11,14, we performed an additional 100 computational runs repeatedly by using synthetic perturbed datasets created by normal random variables for each run, assuming that 5 relative per cent of the mean value of each elemental content corresponds to conceivable analytical error (Supplementary Fig. S7).Rare-earth elements and yttrium flux estimation. Considering that seawater is the ultimate origin ofREY in REY-rich mud, the formation of REY-rich mud should be controlled by the flux of REY from seawater to the sediment surface. Following a simple method22, we estimated the required REY flux for generating REY-rich mud on the basis of the results of the present study, and we compared the value with the REY-precipitation flux provided by the overlying water column. We used Nd as a representative of REY because this element has long been studied as a tracer of ocean circulation, and its residence time in the ocean appears to be the most reliable53,54. The mass of Nd contained in one unit volume of sediment can be written asmNd = sedC Nd, (6)Scientific RepoRts | 6:29603 | DOI: 10.1038/srepwww.nature.com/scientificreports/where sed is the dry bulk density of the sediment and CNd is the bulk content of Nd in the sediment. The regression line between the bulk Nd and total REY content CREY in our data isC Nd = 0.177C REY – 0.346.(7)CNd and CREY showed very good linearity, with R = 0.981 (n = 3,968). Substituting equation (7) for equation (6), the required flux F of Nd to explain the mass of Nd contained in one unit volume of sediment is described asF = R sed (0.177C REY – 0.346), (8)where R is the sedimentation rate. Conversely, the mass of Nd contained in the water column from the sea surface to the seafloor ismNd , SW = D SW C Nd , SW , (9)where D is the water depth, SW is the density of the seawater, and CNd,SW is the concentration of Nd in the seawater. Assuming that all of the Nd contained in the.